manualshive.com logo in svg

3D Systems PostCure 1050, Руководство пользователя, Страница: 4 / 68

Поделиться
Скачать
3D Systems PostCure 1050 Скачать руководство пользователя страница 4

1

  POSTCURE 1050 INTRODUCTION

Thank you for purchasing the PostCure 1050 System.
The PostCure 1050 is an industrial-scale post-processing system offering high volume, high-speed drying and curing for batch

jobs and large-scale, production-grade resin parts up to 1050 x 800 x 625 mm.
Printed resin parts are dried and fully cured using post-cure recipes optimized for each material. Uniform light and temperature

within the cure chamber provide a consistent post-curing environment so that every printed part is consistently cured every

time. Customizable curing recipes allow users to adjust curing settings to meet application-specific needs. Multiple LED

wavelengths provide broad or narrow light spectrums to meet the needs of a wide range of resin materials.
This manual provides users with an understanding of features, system requirements, and operating procedures needed to

successfully cure 3D printed parts on the PostCure 1050.

Copyright and Corporate Identity
PostCure 1050 with regard to UV curing stations is a trademark of 3D Systems.

Improvements
3D Systems may (but shall not be obligated to) make improvements to this document from time to time. However, the Licensed

User acknowledges that at any time after the expiration of the date of issuance, 3D Systems may institute a periodic charge or

fee payable by the Licensed User in return for ongoing receipt of improvements. It is the responsibility of the Licensed User

to provide 3D Systems with current information as to its name and address. The Licensed User also undertakes to notify 3D

Systems promptly in the event that it considers any of the data contained in this document to be incomplete or erroneous in

any respect, in connection with the Licensed User's particular or general use.

FCC Notice
United States
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not

installed and used in accordance with these instructions, it may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct

the interference at his/her own expense.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
European Union

CAUTION: This is a Class A product. In a domestic environment, this product can cause radio interference in

which case the user could be required to take adequate measures.

Korea

Warning statement
EMC Registration is done on this equipment for business use only. It may cause interference when the product would be used

in home.
This warning statement applies a product for business use.

3D Systems, Inc.

1

p/n 40-D177, Rev. A

Содержание PostCure 1050





































































Отзывы:

Нет отзывов