3D Systems PostCure 1050, Руководство пользователя, Страница: 24 / 68

A
Base Recipe - The parameters of the current recipe
B
Drying Cycle - Tap to toggle the drying cycle on/off.
C
Load Factor - Indicates if this recipe will cure a low,
medium, or high volume of parts. This will ensure
that the machine uses the appropriate light levels,
depending on the number and sizes of parts. Parts
absorb light inside the chamber. More parts result
in lower light levels. To ensure light levels and
curing performance are consistent for curing a few
small parts, or a chamber full of parts, the LED
output is adjusted to compensate for the absorbed
light for the specific material in the recipe. See
Cure a Printed Part for sample part loads
If the recipe is not a custom recipe, the screen will look like the one below. You will not be able to delete it; but you can archive
it so that it does not show in your recipe list. This might be useful if you only want the materials you frequently use to be in the
recipe list. To do this:
1. Select Archive on the recipe screen.
3D Systems, Inc. 21 p/n 40-D177, Rev. A