3D Systems DMP Flex 350, Оригинальное руководство пользователя

Страница: 9 / 45

3D Systems, Inc. 5 p/n: 15-D99, rev. C
3 EQUIPMENT AND PACKAGING
3.1 Equipment
This section lists all of the equipment that is provided as a part of the DMP Flex 350 system.
PRODUCTION PRINTER SUBMODULES
DMP Flex 350
• Process chamber
• Electrical cabinet
• Blower
•
Process filter
• Transport cart
• Sieving station (optional)
3.2 Crated Weights and Dimensions
3D Systems expedites the assembly and sub-assembly parts in wooden transport crates. The Centre Of Gravity (COG) of the
packed wooden crate is indicated on the wooden crate. Mark that the COG of the assembly or sub-assembly part is indicated
on supplied drawings. Mark that the wooden crates are equipped with forklift-pockets. 3D Systems states the underneath
dimensions for: logistical purposes internal at the facility of the client, plant – and building access.
The wooden crates have the following dimensions and weight:
ASSEMBLY W (MM / INCH) D (MM / INCH) H (MM / INCH) MASS (KG / LBS)
Printer module 2540 / 100 1830 / 72 2760 / 109 4400 / 9700
Printer ancillaries 2200 / 87 1840 / 73 1920 / 76 1100 / 2425
Chiller 580 / 23 790 / 31 470 / 19 58 / 127
3.3 Storage Requirements
The packaging consists of crates with physical-chemical protection. The corrosion protection is guaranteed by a seal wrapping
film and by the addition of desiccant bags. The printer must be stored on a dry location, in their original packaging, in a stable
position protected from impact.
3.3.1 Recommended Storage Conditions
• Dust free environment
• Frost free environment
• Indoor location
• Humidity level: 20% - 80%
• Storage temperature: 5° C - 40° C (40° F - 105° F)
3.4 Noise Emission
The DMP Flex 350 is in scope with Machinery Directive 2006/42/EC on noise emissions. The noise emission measurements were
performed on a DMP Flex 350 compact setup, including printer, blower, chiller and vacuum pump.
3.4.1 Measurement Device
All measurements are performed with the following device:
Testo 815
• Calibration certificate nr: 2780191
• Date of calibration: 03/07/2018
• Calibrated by: Calimet Calibration