SAFETY SYMBOLS AND DEFINITIONS
SAFETY GUIDELINES
• Follow all safety rules in this section and observe all cautions and warnings in this guide .
• Do not modify any safety features or make modifications to the CubeX. Doing so is prohibited and voids the warranty.
• Use of print materials other than genuine 3D Systems components may void the warranty .
• Adult supervision is required; observe children closely and intervene as necessary to prevent potential safety problems and
ensure the CubeX’s appropriate use . Ensure small 3D prints are not accessible to young children . 3D prints are potential choking
hazards for young children.
• When the CubeX is operating, the tip of the material dispenser (Print Jet) becomes hot; avoid touching this area until it has
cooled down .
!
Hot Surface Hazard:
A hot surface is accessible in the vicinity of this sign or at the Print Jet; avoid contact . Hot
surfaces can cause severe burns .
Caution:
Indicates something may happen that could cause loss of data, damage to equipment, or could cause
personal injury .
Caution:
Indicates a pinch point hazard that could cause person injury.
IMPORTANT SAFETY INFORMATION
4
