Pannoramic SCAN 150 1.15 User’s Guide
4 Software Description
The Preview tab offers options for threshold setting and selection of the area to be scanned. The
options in Automatic mode are the same as described in Manual mode.
In Automatic mode you cannot change the threshold values (it will use the threshold values that were
set previously in the Manual mode), and when activating the
Use selection box
option, the area
cannot be set.
For more information, see section
4.5.3. Preview tab
.
Note:
It is recommended to use profiles, since the Automatic mode does not
provide a preview image to check settings.
4.6.4 Focus tab
Figure 59 – Focus tab
Focus
You can define focus limits by selecting
Limit focus range
checkbox. You can set the upper
and lower limits by selecting the desired value in the selection boxes. Activate this option if
focusing was not targeted on the specimen, but on a spot on the coverslip.
4.6.5 Service tab
Figure 60 – Service tab
2012. March 13.
3DHISTECH Ltd.
100
(
132
)
