Changing SNMP Settings
43
7
Click
Apply
.
To delete one or more clients from the 802.1X Exception List:
1
On the 802.1X Exception List page, select the check box for the client or
clients that you want to delete.
2
Click
Delete
.
3
Click
Apply
.
Adding a New MAC
Address to the 802.1X
Exception List
Use the New MAC page to add a client to the 802.1X Exception List.
1
In
MAC address
, type the MAC address of the client you want to add to
the 802.1X Exception List.
2
Click
Add
.
3
To add another client, repeat steps 3 and 4 in “Using the 802.1X
Exception List” startin on page 42.
4
When finished, click
Apply
on the 802.1X Exception List page.
Changing SNMP
Settings
Under
System Configuration
, click
SNMP
to display and change settings
for the Simple Network Management Protocol.
To communicate with the Bridge, the SNMP agent must first be enabled
and the Network Management Station must submit a valid community
string for authentication. Select
SNMP Enable
and enter data into the
fields as described below. When you are finished, click
Apply
.
Table 14
SNMP Settings
Setting
Description
SNMP
Enables or disables SNMP.
Contact
Sets the location string that describes the system location.
Maximum length: 255 characters.
Community Name
(Read Only)
Specifies a community string with read-only access.
Authorized management stations are able to retrieve MIB
objects. Maximum length: 23 characters.
Community Name
(Read/Write)
Specifies a community string with read-write access.
Authorized management stations are able to both retrieve
and modify MIB objects. Maximum length: 23 characters.
