3Com V7000, Телефонная инструкция

Страница: 78 / 84

78 C
HAPTER
7: A
DVANCED
F
EATURES
Enabling Bridge
Extensions
This section describes how to enable and use bridge extensions set up
through the VCX 7000 User Interface.
The VCX system allows you to set up your extension so that other users
can receive your calls at their phone. Through the 3Com VCX Web
Interface, you can grant permission to up to 10 users to receive calls
intended for your extension; that is, you are “bridging” your extension to
their phone.
Bridging an extension requires three steps:
1 On the phone whose extension you want to bridge (for example,
extension 1000):
a Log in to the VCX 7000 User Interface, select the My Extensions
option, then access the Bridge Permissions tabbed page.
b Specify the extension (for example, extension 1001) that you want to
receive a bridged call and click
Save .
2 On the phone that will receive a bridged call (in this example, extension
1001):
a Log in to the VCX 7000 User Interface, select the My Extensions
option, then access the Bridge Mappings tabbed page.
b Map the bridged extension (in this example, extension 1000) to an
Access button (either button 4 or 5) and click
Save .
You should not bridge an extension to a Basic phone (Models 2101 or
3101) because these phones have no programmable access buttons.
Therefore, a Basic phone has no way of distinguishing a call to its
extension and a bridged call.
3 For the bridged line settings to take effect, log off and then log on to the
phone that will receive a bridged call (in this example, extension 1001).
In this example, an incoming call to extension 1000 will also be offered to
extension 1001 on line 4 or on line 5 depending what you selected in
step 2b.
The bridged phone can identify up to 10 phone number to bridge with,
but the number of extensions it can actually bridge is determined by the
maximum number of contacts that the system administrator has set up
for the phone.