3Com OfficeConnect WX1200, Справочник по командам

Страница: 610 / 646

610 C
HAPTER
23: S
YSTEM
L
OG
C
OMMANDS
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To stop sending system logging messages to a server at
192.168.253.11, type the following command:
WX4400# clear log server 192.168.253.11
success: change accepted.
Type the following command to clear all messages from the log buffer:
WX4400# clear log buffer
success: change accepted.
See Also
„
clear log trace on page 590
„
set log on page 614
display log buffer
Displays system information stored in the nonvolatile log buffer or the
trace buffer.
Syntax —
display log buffer [{ + | - } number-of-messages ]
[ facility facility-name ] [ matching string ]
[ severity severity-level ]
„
buffer
— Displays the log messages in nonvolatile storage.
„
+ | - number-of-messages
— Displays the number of messages
specified as follows:
„
A positive number (for example, +100 ), displays that number of log
entries starting from the oldest in the log.
„
A negative number (for example, -100 ) displays that number of log
entries starting from newest in the log.
„
facility facility-name — Area of MSS that is sending the log
message. Type a space and a question mark ( ? ) after display log
buffer facility for a list of valid facilities.
„
matching string — Displays messages that match a string—for
example, a username or IP address.