3Com OfficeConnect WX1200, Справочник по командам

Страница: 26 / 646

26 C
HAPTER
1: U
SING THE
C
OMMAND
-L
INE
I
NTERFACE
IP Address and Mask
Notation
MSS displays IP addresses in dotted decimal notation — for example,
192.168.1.111. MSS makes use of both subnet masks and wildcard
masks.
Subnet Masks
Unless otherwise noted, use classless interdomain routing (CIDR) format
to express subnet masks — for example, 192.168.1.112/24. You indicate
the subnet mask with a forward slash (
/ ) and specify the number of bits in
the mask.
Wildcard Masks
Security access control lists (ACLs) use source and destination IP addresses
and wildcard masks to determine whether the wireless LAN switch filters
or forwards IP packets. Matching packets are either permitted or denied
network access. The ACL checks the bits in IP addresses that correspond
to any
0 s (zeros) in the mask, but does not check the bits that correspond
to 1 s (ones) in the mask. You specify the wildcard mask in dotted decimal
notation.
For example, the address 10.0.0.0 and mask 0.255.255.255 match all IP
addresses that begin with 10 in the first octet.
User Globs, MAC
Address Globs, and
VLAN Globs
Name “globbing” is a way of using a wildcard pattern to expand a single
element into a list of elements that match the pattern. MSS accepts user
globs, MAC address globs, and VLAN globs. The order in which globs
appear in the configuration is important, because once a glob is matched,
processing stops on the list of globs.
User Globs
A user glob is shorthand method for matching an authentication,
authorization, and accounting (AAA) command to either a single user or
a set of users.
A user glob can be up to 80 characters long and cannot contain spaces or
tabs. The double-asterisk (
** ) wildcard characters with no delimiter
characters match all usernames. The single-asterisk ( * ) wildcard character
matches any number of characters up to, but not including, a delimiter
character in the glob. Valid user glob delimiter characters are the
at (@)
sign and the period (.).