3Com OfficeConnect WX1200, Справочник по командам

Страница: 496 / 646

496 C
HAPTER
16: RADIUS
AND
S
ERVER
G
ROUP
C
OMMANDS
Examples — To set a RADIUS server named RS42 with IP address
198.162.1.1 to use the default accounting and authorization ports with a
timeout interval of 30 seconds, two transmit attempts, 5 minutes of dead
time, and a key string of
keys4u , type the following command:
WX1200# set radius server RS42 address 198.162.1.1 timeout 30
retransmit 2 deadtime 5 key keys4U
See Also
„
display aaa on page 219
„
set authentication admin on page 229
„
set authentication console on page 231
„
set authentication dot1x on page 233
„
set authentication last-resort on page 236
„
set authentication mac on page 239
„
set authentication web on page 242
„
set radius on page 490
„
set server group on page 496
set server group
Configures a group of one to four RADIUS servers.
Syntax —
set server group group-name members server-name1
[ server-name2 ] [ server-name3 ] [ server-name4 ]
„
group-name
— Server group name of up to 32 characters, with no
spaces or tabs.
„
members server-name1, server-name2, server-name3,
server-name4
— The names of one or more configured RADIUS
servers. You can enter up to four server names.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must assign all group members simultaneously, as shown
in the example. To enable load balancing, use set server group
load-balance enable .