manualshive.com logo in svg

3Com OfficeConnect WX1200, Справочник по командам

Поделиться
Скачать
3Com OfficeConnect WX1200 Скачать руководство пользователя страница 356

356

C

HAPTER

 11: M

ANAGED

 A

CCESS

 P

OINT

 C

OMMANDS

MAP radios can also issue countermeasures against interfering devices. 
An interfering device is not part of the 3Com network but also is not a 
rogue. No client connected to the device has been detected 
communicating with any network entity listed in the forwarding database 
(FDD) of any WX switch in the Mobility Domain. Although the interfering 
device is not connected to your network, the device might be causing RF 
interference with MAP radios.

Syntax

 — 

set radio-profile 

name

 countermeasures {all | rogue 

| configured | none}

„

name 

— Radio profile name.

„

all 

— Configures radios to attack rogues and interfering devices.

„

rogue 

— Configures radios to attack rogues only.

„

configured 

— Configures radios to attack only devices in the attack 

list on the WX switch (on-demand countermeasures). When this 
option is specified, devices found to be rogues by other means, such 
as policy violations or by determining that the device is providing 
connectivity to the wired network, are not attacked.

„

none 

— Disables countermeasures for this radio profile.

Defaults

 — Countermeasures are disabled by default.

Access

 — Enabled.

History

 —

 

Command introduced in MSS Version 4.0. New option 

configured

added to support on-demand countermeasures in MSS 

Version 4.1.

Examples

 — The following command enables countermeasures in radio 

profile 

radprof3

 for rogues only:

WX1200# 

set radio-profile radprof3 countermeasures rogue

success: change accepted.

The following command disables countermeasures in radio profile 

radprof3

: 

WX1200# 

clear radio-profile radprof3 countermeasures

success: change accepted.

Содержание OfficeConnect WX1200







































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды