3Com IntelliJack NJ225FX Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 88

background image

8

C

HAPTER

1: I

NSTALLING

THE

I

NTELLI

J

ACK

Before you begin the installation, determine which type of power supply the
IntelliJack will use.

Using an Integrated Switch with Power Over Ethernet

To use Power Over Ethernet, you must have a switch on the network that has
Power Over Ethernet integrated into it.

Connect the network data/power cable to the IntelliJack white cable, as shown in
the following illustration.

Using an Ethernet Multi-port Midspan Power Supply

To use an Ethernet multi-port midspan power supply, you must connect the
power supply to your network, as shown in the following illustration.

The Ethernet multi-port midspan power supply from 3Com connects to an existing
Ethernet or Fast Ethernet infrastructure with standard Category 5 or better
cabling, and powers up to 24 IntelliJack devices. For complete installation
instructions, see the Ethernet multi-port midspan power supply documentation
located at www.3Com.com.

Connect the network data/voice/power cable to the IntelliJack white cable, as
shown in the following illustration.

NOTE: For a list of power supplies that support the IntelliJack, go to
www.3com.com.

CAUTION: Use only a power supply that is provided or approved by 3Com for
use with this IntelliJack. Failure to do so may result in damage to the IntelliJack,
or may result in a hazardous situation or personal injury.

NOTE: The black cable can also be connected to an Ethernet multi-port midspan
power supply and will power an IEEE 802.3af device connected to the
pass-through port on the IntelliJack, but it will not provide power to the
IntelliJack.

«
...
10
11
12
13
14
...
»

Содержание IntelliJack NJ225FX

























































































Отзывы:

Нет отзывов

Похожие инструкции для IntelliJack NJ225FX

Бренд: Qualys Страницы: 2

ADSL 2/2+ Router with USB Port ADE-3410v2

Бренд: Planet Страницы: 62

Бренд: FOR-A Страницы: 2

Speedway Revolution

Бренд: impinj Страницы: 60

Бренд: Paradyne Страницы: 6

Бренд: Idis Страницы: 16

Бренд: MSNswitch Страницы: 2

Бренд: Icy Box Страницы: 2

Бренд: LevelOne Страницы: 11

Бренд: Aviosys Страницы: 77

GS2020E GigaSPIRE BLAST

Бренд: Calix Страницы: 15

Бренд: Wave wifi Страницы: 3

Бренд: DHD Power Cruiser Страницы: 60

Бренд: VERTO Страницы: 48

Бренд: ADC Страницы: 29

VDA-NVR2108W4KS2

Бренд: Dahua Technology Страницы: 363

Бренд: Orcomm Страницы: 10

Бренд: Sarian Systems Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды