4-8
C
HAPTER
4: L
OADING
N
ETWORK
D
RIVERS
If you are running NetWare and you have installed multiple
3C592 EtherLink EISA adapters in an EISA-compliant computer,
follow these steps to install the NetWare ODI client driver:
1
Make sure your computer is turned off. Install the first
adapter.
2
Connect the network cable to the adapter.
3
Insert the EISA configuration utility diskette and turn on
the computer.
4
Run the EISA configuration program.
5
When the program has finished:
a
Save the configuration.
b
Remove the EISA configuration diskette and exit the
program.
c
Restart the computer.
6
Insert the
EtherDisk
diskette and run the AutoLink program.
Refer to the sections “AutoLink Requirements” and “AutoLink
Installation” earlier in this chapter for instructions.
7
When the AutoLink installation is complete, remove the
diskette, reboot the computer, and physically connect it to
the server if you have not already done so.
8
Turn off the computer, install the second adapter, and
connect the network cable to the adapter.
9
Insert the EISA configuration utility diskette and turn on
the computer.
10
Run the EISA configuration program.
11
When the program has finished:
a
Save the configuration.
