background image

 

2

 

A

 

BOUT

 

 T

 

HIS

 

 G

 

UIDE

 

Conventions

 

The following tables list text and icon conventions that are 
used throughout this guide.

 

Table 1   

 

Text Conventions

 

Convention

Description

 

Text represented as 

 

screen display

This typeface 

is used to represent displays that 

appear on your terminal screen, for example:

NetLogin:

Text represented as 

commands

This typeface 

is used to represent commands that 

you enter, for example:

print autolink.log

Keys

When specific keys are referred

 

to in the text, they are 

called out by their labels, such as “the Return key” or 
“the Escape key,” or they may be shown as [Return] or [Esc]. 

If two or more keys are to be pressed simultaneously, the 
keys are linked with a plus sign (+), for example:

Press [Ctrl]+[Alt]+[Del].

Table 2   

Notice Icons

Icon

Type

Description

Information Note

Information notes call attention to important features or 
instructions.

Caution

Cautions alert you to personal safety risk, system damage, 
or loss of data.

Warning

Warnings alert you to the risk of severe personal injury.

Содержание III















































































Отзывы: