Loading NetWare ODI Drivers
4-5
2
Insert the 3C59X
EtherDisk
dis
kette in a floppy drive on
your computer and make that drive the active drive.
For example, if the diskette drive is A, type the following
command:
A: [Enter]
3
At the prompt, type:
INSTALL [Enter]
Alternatively, at the prompt, type:
AUTOLINK [Enter]
If you type AUTOLINK instead of INSTALL, you will bypass the
EtherDisk
diskette
menu program (skipping steps 5 and 6)
and advance to step 7.
4
The first time you use the diskette to install an adapter, a
license screen appears. To accept the terms and conditions
of the 3Com end-user software license agreement, type
the following:
Y
To view the full text of the license agreement, press [F1].
Once you have agreed to the terms and conditions of the
3Com license agreement, the license information screen will
not appear again.
The Auto Installation Information screen appears, as shown in
Figure 4-2.
5
Read the screen and press [Enter].
6
When the main menu screen shown in Figure 4-3 appears,
select
NetWare DOS ODI Client
, and press [Enter].
Auto installation may take a few minutes. Several messages
appear while the AutoLink program is running. A final
message indicating successful installation appears.
