4-12
C
HAPTER
4: L
OADING
N
ETWORK
D
RIVERS
Finding the Adapter’s Port Address for Multiple
Adapters
To find the appropriate adapter’s port address when installing
more than one adapter in a NetWare server, follow these steps.
You must use the adapter’s
port address
when installing one
or more adapters in a server. You must use the adapter’s
slot
number
when installing one or more adapters in a client.
1
Access the main menu on the
EtherDisk
diskette.
a
Boot the computer under DOS.
b
Insert the
EtherDisk
diskette in a floppy drive and make
that drive the active one.
c
At the prompt, type:
INSTALL [Enter]
The main menu appears.
2
Select
Configuration/Diagnostic/Troubleshooting
, and
press [Enter].
3
In the next screen, select
Configuration and Diagnostic
Program
, and press [Enter].
If multiple adapters have been installed, the screen that
appears will list them.
4
Select the adapter whose port address you want.
5
Select
View
in the menu bar, and press [Enter].
The screen that appears contains the desired I/O port
address. Make a note of the address.
6
Repeat steps 3 and 4 for each adapter.
7
Exit the program.
