14
ATM I
NTERFACE
M
ODULE
Q
UICK
S
TART
G
UIDE
8
To secure the daughter card, insert the three flathead countersink phillips
screws into the faceplate of the ATM Interface Carrier Module (Figure 8).
Insert the screws in the following order:
a
Center of daughter card
b
Right of daughter card
c
Left of daughter card
Figure 8
Securing the Daughter Card
Removing the
OC-3/STM-1
Daughter Card
This section describes how to remove the OC-3/STM-1 daughter card.
Equipment Required
To remove the OC-3/STM-1 card you need:
A #1 phillips-head screw driver
The anti-static bag that the OC-3/STM-1 card was shipped in
The protective plate (if you are removing and not replacing the
module)
3C
B
8A
K
2
1
1
1
2
2
2
3
3
4
4
