34
ATM I
NTERFACE
M
ODULE
Q
UICK
S
TART
G
UIDE
ATM Switch Fabric Module Monitor Download
To download the ATM Switch Fabric Module Monitor software, use the
following procedure:
1
Wait until the "AFTER DOWNLOAD (go to MON)" message is displayed,
then change the baud rate to 57600.
2
Press "Enter" twice.
3
After the "=>" prompt is displayed, type
dm 60
and press "Enter".
4
Set the modem type to "XMODEM".
5
Download the "Cb9mon.cel" file.
6
After the "=>" prompt is displayed, change the baud rate to 9600.
7
Reboot the CoreBuilder 9000 by switching the power off and then back
on.
ATM Switch Fabric Module Software Download
To preform the ATM Switch Fabric Module software download:
1
Log into the CoreBuilder 9000 Enterprise ATM Switch Local Management
Access (LMA) See “Starting Up” on page 38 for complete log in
instructions.
2
Set the download flag to 1 entering the command,
1 1 3
at the Main
Menu prompt.
3
Reboot the CoreBuilder 9000 by entering the command,
1 7
at the Main
Menu prompt.
4
Wait until the "AFTER DOWNLOAD (go to MON)" message is displayed,
then change the baud rate to 57600.
5
Press "Enter" twice.
6
After the "=>" prompt is displayed, type
do
and press "Enter".
7
Set the modem type to "XMODEM".
8
Download the "Cb9swm.cel" file.
9
Skip to the next section if Interface Module software download is also
required.
10
After the "=>" prompt is displayed, change the baud rate to 9600.
11
Reboot the CoreBuilder 9000 by switching the power off and then back
on.
