12
ATM I
NTERFACE
M
ODULE
Q
UICK
S
TART
G
UIDE
2
Insert the protective plugs into the left cutout from the back of the ATM
Interface Carrier Module (Figure 5) until the 3 front holes of the daughter
card are aligned with the 3 holes in the faceplate of the ATM Carrier
Module.
Figure 5
Inserting the OC-3/STM-1 Card into the Cutouts
3
Lower the OC-3/STM-1 card until the card rests on the spacers,
4
Look from the side of the ATM Interface Carrier Module and align the
beige connector of the ATM Interface Carrier Module with the beige
connector of the OC-3/STM-1 card.
