3Com 5500-EI Series, Справочное руководство

Страница: 499 / 1314

1-20
Examples
# Set the 802.1x re-authentication interval to 150 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x timer reauth-period 150
dot1x version-check
Syntax
dot1x version-check [ interface interface-list ]
undo dot1x version-check [ interface interface-list ]
View
System view, Ethernet port view
Parameters
interface-list : Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the dot1x version-check command to enable 802.1x client version checking for specified Ethernet
ports.
Use the undo dot1x version-check command to disable 802.1x client version checking for specified
Ethernet ports.
By default, 802.1x client version checking is disabled on all the Ethernet ports.
In system view:
z
If you do not provide the interface-list argument, these two commands apply to all the ports of the
switch.
z
If you specify the interface-list argument, these commands apply to the specified ports.
In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current Ethernet port.
Examples
# Configure Ethernet 1/0/1 to check the version of the 802.1x client upon receiving authentication
packets.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x version-check