3Com 5500-EI Series, Справочное руководство

Страница: 378 / 1314

6-3
Field Description
system memory limit Lower limit of the switch memory.
auto-establish enabled
Automatic connection is enabled (If automatic
connection is disabled,
auto-establish disabled
is
displayed).
Free Memory Size of the current free memory in bytes
The times of disconnect: Number of disconnections of the routing protocol
The times of reconnect Number of reconnections of the routing protocol
The current state
Current memory state, including
z
Normal
z
Exigence
memory
Syntax
memory
{
safety safety-value | limit limit-value
}*
undo memory
[
safety
|
limit
]
View
System view
Parameters
safety-value
: Safety free memory of the switch , in Mbytes. Its value range depends on the free memory
of the current switch. This value defaults to 5.
limit-value
: Lower limit of the switch free memory, in Mbytes. Its value range depends on the free
memory of the current switch. This value defaults to 4.
Description
Use the
memory limit limit-value
command to configure the lower limit of the switch free memory.
When the free memory of the switch is less than the
limit-value
, all the routing protocol connections will
be disconnected forcibly.
Use the
memory safety safety-value
command to configure the safety value of the switch free
memory.
If you use the
memory auto-establish enable
command (the default configuration), the routing
protocol connection that is forcibly disconnected automatically recovers when the free memory of the
switch reaches the
safety-value.
Use the
memory safety safety-value limit limit-value
command to change both the safety value and
lower limit of the switch free memory.
Use the
undo memory
command to restore the default safety value and lower limit of the switch free
memory.
Related commands:
memory auto-establish disable
,
memory auto-establish enable
,
display
memory limit
.