3Com 5500-EI Series, Справочное руководство

Страница: 41 / 1314

2-4
undo snmp-agent group v3 group-name [ authentication | privacy ]
View
System view
Parameters
v1 : SNMPv1.
v2c : SNMPv2c.
v3 : SNMPv3.
group-name : Group name. This argument can be of 1 to 32 characters.
authentication : Specifies to authenticate SNMP data without encrypting the data.
privacy : Authenticates and encrypts packets.
read-view : Name of the view to be set to read-only. This argument can be of 1 to 32 characters.
write-view : Name of the view to be set to readable & writable. This argument can be of 1 to 32
characters.
notify-view : Name of the view to be set to a notifying view. This argument can be of 1 to 32 characters.
acl acl-number : Specifies an ACL. The acl-number argument ranges from 2,000 to 2,999.
Description
Use the snmp-agent group command to create an SNMP group. You can also optionally use this
command to apply an ACL to filter network management users.
Use the undo snmp-agent group command to remove a specified SNMP group.
By default, the SNMP group configured through the snmp-agent group v3 command is not
authenticated or encrypted.
Examples
# Create an SNMP group named h123 and apply ACL 2001 for network management users (assuming
that basic ACL 2001 already exists).
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent group v1 h123 acl 2001
snmp-agent usm-user
Syntax
For SNMPv1 and SNMPv2c:
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl acl-number ]
undo snmp-agent usm-user { v1 | v2c } user-name group-name
For SNMPv3:
snmp - agent usm - user v3 user-name group-name [ [ cipher ] authentication - mode { md5 | sha }
auth-password [ privacy - mode { aes128 | des56 } priv-password ] ] [ acl acl-number ]
undo snmp - agent usm - user v3 user-name group-name { engineid engineid-string | local }