3Com 5500-EI Series, Справочное руководство

Страница: 480 / 1314

1-1
1
802.1x Configuration Commands
802.1x Configuration Commands
display dot1x
Syntax
display dot1x [ sessions | statistics ] [ interface interface-list ]
View
Any view
Parameters
sessions : Displays the information about 802.1x sessions.
statistics : Displays the statistics on 802.1x.
interface : Display the 802.1x-related information about a specified port.
interface-list : Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the display dot1x command to display 802.1x-related information, such as configuration
information, operation information (session information), and statistics.
When the interface-list argument is not provided, this command displays 802.1x-related information
about all the ports.
The output information can be used to verify 802.1 x-related configurations and to troubleshoot.
Related commands: reset dot1x statistics , dot1x , dot1x retry , dot1x max-user , dot1x port-control ,
dot1x port-method , dot1x timer .
Examples
# Display 802.1x-related information.
<Sysname> display dot1x
Global 802.1X protocol is enabled
CHAP authentication is enabled
DHCP-launch is disabled
Handshake is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
EAD Quick Deploy is enabled