3Com Switch 4500G Family
45
Command Reference
snmp-agent packet max-size
Use the
snmp-agent packet max-size
command to configure the maximum number of bytes in an SNMP
packet that can be received or sent by an agent.
System view
snmp-agent sys-info
Use the
snmp-agent sys-info
command to configure system information, including the contact
information, the location information, and the SNMP version in use.
System view
snmp-agent target-host
Use the
snmp-agent target-host
command to command to configure the related settings for a Trap target
host.
System view
snmp-agent trap enable
Use the
snmp-agent trap enable
command to enable the device to send Trap packets.
System view
snmp-agent trap life
Use the
snmp-agent trap life
command to configure the life time for Trap packets. Traps will be discarded
when their life time expires.
System view
snmp-agent trap queue-size
Use the
snmp-agent trap queue-size
command to configure the size of the Trap queue.
System view
snmp-agent trap source
Use the
snmp-agent trap source
command to specify the source IP address to send Trap packets.
System view
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a new user to an SNMP group. You can also optionally
use this command to apply an ACL to filter network management users.
System view
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a user to an SNMP group.
System view
snmp-host
Use the
snmp-host
command to configure an SNMP host for the member devices inside a cluster on the
management device.
Cluster view
source-deny
Use the
source-deny
command to enable multicast source port filtering.
IGMP Snooping view
source-interface
Use the
source-interface
command to configure the source interface from which a test request packet is
sent. In this case, the routing table is not searched.
NQA Test Group view
source-ip
Use the
source-ip
command to configure a source IP address for a test request packet.
NQA Test Group view
source-port
Use the
source-port
command to configure a source port number for a test request packet.
NQA Test Group view
speed
Use the
speed
command to set the transmission speed of the user interface.
AUX User Interface view
speed
Use the
speed
command to configure Ethernet interface data rate.
Ethernet Interface view
ssh client authentication server
Use the
ssh client assign rsa-key
command to configure the host public key of the server so that the
client can determine whether the server is reliable.
System view
