3Com Switch 4500G Family
7
Command Reference
count
Use the
count
command to configure the number of probes in a test.
NQA Test Group view
country
Use the
country
command to specify the code of the country to which the entity belongs. It is a standard
2-byte code, for example, CN for China.
PKI Entity view
crl check
Use the
crl check
command to enable or disable CRL checking.
PKI Domain view
crl update-period
Use the
crl update-period
command to specify the update period of CRL, which is the interval between
local downloads of CRLs from CRL access server.
PKI Domain view
crl url
Use the
crl url
command to specify the distribution point URL for CRL.
PKI Domain view
cut connection
Use the
cut connection
command to cut down one user connection or one type of user connections
forcibly.
System view
databits
Use the
databits
command to set the databits for the user interface.
AUX User Interface view
datafill
Use the
datafill
command to configure a string of fill characters for a test packet.
NQA Test Group view
datasize
Use the
datasize
command to configure the size of a test packet, namely, an echo request packet (IP
header and ICMP header excluded).
NQA Test Group view
debugging
Use the
debugging
command to enable specific type of debugging or all types of debugging.
User view
default cost
Use the
default cost
command to define a value for the default metric of the redistributed route.
RIP view
default-route originate
Use the
default-route originate cost
command to enable the current router to originate a default route
to RIP neighbors when the router needs to generate a default route with the specified cost.
RIP view
delete
Use the
delete
command to remove a file from the storage device to the recycle bin, where you can restore
the file with the undelete command or permanently delete it with the reset recycle-bin command.
User view
delete
Use the
delete
command to delete a file on the remote FTP server.
FTP Client view
delete
Use the
delete
command to delete a specified file from a server.
SFTP Client view
delete ipv6 static-routes all
Use the
display ip routing-table
command to display summary information about active routes in the
routing table.
Any view
delete-member
Use the
delete-member
command to remove a member device from the cluster.
Cluster view
