12
3Com Switch 4500G Family
Command Reference
display fib statistics
Use the
display fib statistics
command to view the total number of FIB entries.
Any view
display ftp-server
Use the
display ftp-server
command to display the FTP server-related settings of a switch when it
operates as an FTP server.
Any view
display ftp-user
Use the
display ftp-user
command
to display the parameter settings of current FTP users.
Any view
display garp statistics
Use the
display garp statistics
command to display the GARP statistics on specified (or all) ports.
Any view
display garp timer
Use the
display garp timer
command to display the values of the GARP timers on specified or all ports.
Any view
display gvrp statistics
Use the
display gvrp statistics
command to display the GVRP statistics about specified (or all) Trunk
ports.
Any view
display gvrp status
Use the
display gvrp status
command to display the enable/disable status of GVRP.
Any view
display habp
Use the
display habp
command to display HABP configuration and status information.
Any view
display habp table
Use the
display habp
table
command to display the MAC address table maintained by HABP.
Any view
display habp traffic
Use the
display habp traffic
command to display statistics on HABP packets.
Any view
display history-command
Use the
display history-command
command to view the history commands.
Any view
display hotkey
Use the
display hotkey
command to display the shortcut key allocation information
Any view
display hwtacacs
Use the
display hwtacacs
command to view configuration or statistics information of specified or all
schemes.
Any view
display icmp statistics
Use the
display icmp statistics
command to display statistics of ICMP flows.
Any view
display igmp-snooping group
Use the
display igmp-snooping group
command to view the multicast group information learned by IGMP
Snooping.
Any view
display igmp-snooping statistics
Use the
display igmp-snooping statistics
command to view the statistics information of IGMP
messages learned by IGMP Snooping.
Any view
display info-center
Use the
display info-center
command to display configurations for all channels (except channel 6 to 8)
of the information center.
Any view
