| 1" Metal Blinds Deluxe
6
BLIND REMOVAL
• Push the headrail back
toward the wall or window
casing to release the back
of the headrail from the
mounting bracket hooks.
• Rotate the back of the
headrail down and carefully
lift the headrail off of the
front hooks of the mounting
brackets.
Draw the blind completely up.
BLIND OPERATION
To lower the blind, pull the lift cords down and toward the
center of the blind and allow the cords to slide slowly through
your hand.
To tilt the slats, twist the tilt wand.
Do not attempt to raise or lower the blind unless the slats are
in a completely open (horizontal) position.
To raise the blind, pull the lift cords down.
To engage the lock, pull the lift cords down and toward the
outside of the blind.
Part # PM-028 © 3 Day Blinds Corporation 3/13
WARNING
Young children can STRANGLE in cord and bead chain loops.
They can also wrap cords around their necks and STRANGLE.
• Always keep cords and bead chains out of children’s reach.
• Move cribs, playpens, and other furniture away from cords
and bead chains. Children can climb furniture to get to cords.
• Do not tie cords together. Make sure cords do not twist
together and create a loop.
ANSI/WMCA A100.1-2012 5.2.1
Inner cords can pull out to form a loop, which can strangle a
young child.
• Inner cord stop devices can reduce this risk if positioned
correctly on the pull cords.
• If inner cord stop devices are more than 3 in (76 mm) below
the headrail when the blind is fully lowered, move them
closer by following the inner cord stop device adjustment
instructions.
ANSI/WMCA A100.1-2012 5.3.1.1
3˝ or less
800-800-3329 | 3dayblinds.com
