| 1" Metal Blinds Deluxe
2
• Mount a bracket in each corner of the window.
INSIDE MOUNT
Front of
Window
Casing
The back of the bracket must not be mounted any further
back than 1
3
/
4
" from the front of the window casing. The front
of the bracket will extend slightly beyond the front of the
window casing when installed correctly. Templates have been
provided to assist with placement of the brackets.
Select the template that corresponds with the size of the
blind you purchased.
• Cut out the appropriate
template for the size of
your blind.
• Align the template along
the front edge and inside
corner of window casing.
• Tape template in place.
• Create small pilot holes
with an awl or
1
/
16
" drill bit.
• Mount each bracket with
two screws.
• Additional mounting
brackets, if required,
should be evenly spaced
between the two end
brackets.
• Align the same template
along front edge of
the window casing to
determine mounting
position for additional
brackets.
• Make sure brackets do not
interfere with any moving
parts in the headrail.
Proceed to “Blind Installation”.
Blind Width
Template
10
1
/
2
" – 13"
A
13
1
/
8
" – and up
B
A
B
IMPORTANT: Make sure when
printing this page you print at
100%. DO NOT shrink to fit the
page or the template will not be
accurate and result in improper
installation. There is a rule
drawn on the template so you
can verify the printed template
has been printed correctly.
