2N Helios IP, Руководство по установке

Страница: 47 / 60

2N TELEKOMUNIKACE a.s., www.2n.cz 47/60
3.4 Intercom Control as Viewed by Internal
User
Call Answering
You can answer the incoming calls to the intercom using your 2N Helios IP Base
®
phone like any other calls. You can unlock the door, activate/deactivate a user/profile
via your phone keypad during the call. The calls, however, are time-limited to avoid
unintentional blocking of the line. Set the maximum call duration in 2N Helios IP Base
®
the (refer to the Intercom Configuration / Services / Phone / Calls Call time limit
subsection of Configuration Manual). Press # on your phone anytime to extend the call
time. The automatic call termination is signalled with a short beep 10 s before the call
end.
Calling to 2N ® Helios IP Base
allows you to answer incoming calls. Set the required parameters 2N Helios IP Base
®
in the Incoming calls group; refer to the Intercom Configuration / Services / Phone /
Calls subsection of Configuration Manual.
Door Opening (Switch Activation) by Code
is equipped with a door unlocking switch. Enter the valid code 2N Helios IP Base
®
(refer to the Intercom Configuration / Hardware / Switches subsection of
Configuration Manual) using your phone keypad to activate this switch.
Procedure:
Enter the switch 1 or 2 activating code using your phone keypad and press for
confirmation. Confirmation is unnecessary if the Lock code without confirmation
is enabled, refer to the Intercom Configuration / Hardware / Switches /
Advanced subsection of Configuration Manual.
A valid code is signalled by the sound. An invalid code or interruption longer
than as defined in is signalled by the Timeout for Entering Numbers
sound.