Installation Guide for the 2GIG EDGE Security Panel
32
Glass Break
To program the built-in Glass Break sensor, adjust the following
settings .
Sensor
1 .
Tap
Glass Break
.
2 .
Choose
Enabled
or
Disabled
.
3 .
Tap
to move to the next option.
Voice Descriptor
1 .
Highlight
Voice Descriptor
.
2 .
Tap
Edit Voice Descriptor
to reveal the keypad.
3 .
Use the keypad to enter the first few letters of the desired word.
4 .
Tap the matching word above the keypad.
5 .
Repeat the steps above to enter a phrase.
6 .
Tap
Done
.
7 .
Review the voice descriptor.
8 .
Tap
to move to the next option.
Sensor Chime
1 .
Highlight
Sensor Chime
.
2 .
Choose
Enabled
or
Disabled
.
3 .
Tap
to move to the next option.
Smart Areas Assignment
1 .
Highlight
Smart Areas Assignment
.
2 .
Choose a Smart Area (Partition) for the zone.
3 .
Tap
to move to the next option.
Transmission Delay
1 .
Highlight
Transmission Delay
.
2 .
Choose
Enabled
or
Disabled
.
3 .
Tap
to move to the next option.