Copyright © 2022 Nortek Security & Control LLC
23
Terminal Blocks Wiring Diagram
The 2GIG EDGE Panel includes an 8-position terminal block and a 6-position terminal block. The table below describes each position on the
terminal blocks.
NOTE:
Terminal block accommodates up to 18 gauge wire.
Terminal Block Positions*
GND
AUX+
GND
Bell +
Bell –
Zone 1
Zone 2
GND
DC IN
DC IN +
DC IN –
OCL 1
OCL 2
TX
RX
POWER IN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Position
Label
Description
1
GND (DC OUT–)
GND (DC OUT–)
2
AUX+
5VDC @500mA Max
3
GND
Ground (Low Side Hardwire Zone)
4
Bell +
5-14VDC @ 200mA Max
NOTE:
Bell Output is only active when the 2GIG Edge Panel is powered
by the AC power source.
5
Bell –
6
ZONE 1
Hardwire Loop Zone 1
7
ZONE 2
Hardwire Loop Zone 2
8
GND
Ground (Low Side Hardwire Zone)
9*
DC IN +
14 VDC Power Input (+). Only provides power when the panel’s power
supply is connected to an AC power source.
10*
DC IN –
14 VDC Power Input (–)
11
OCL 1
Open Collector Output 1
12
OCL 2
Open Collector Output 2
13
TX
Image Sensor TX
14
RX
Image Sensor RX
