Copyright © 2022 Nortek Security & Control LLC
21
Replacing the Battery
Follow the steps below to replace a battery in the 2GIG EDGE Panel:
1 .
Remove the four screws that secure the back panel, and then
carefully remove the back cover from the panel.
2 .
Carefully detach the power cable from the battery to be
replaced.
Detach
3 .
Take hold of the battery, and carefully detach it from the panel.
Note:
You may need to apply a reasonable amount of force to
separate the battery from the adhesive that holds it in place.
Remove
Battery
4 .
Peel off the adhesive strip from the back of the new battery.
Adhesive Strip