2Flow MAG-11 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 58

background image

2

1.2 Disclaimers

The following situations do not belong to product liability:

(1) Damage caused by customers' negligence or lack of maintenance of products.
(2)  Problems  or  damage  caused  by  violation  of  relevant  regulations  during  operation,
operation and storage.
(3) Problems or damage caused by natural disasters and other external factors.
(4) Problems or damage caused by repair or modification by personnel not authorized by
the company.
(5) If the customer or a third party is injured when using the product, and these injuries are
caused by unpredictable defects of the product, the company will not bear any
Responsibility, nor will it be responsible for indirect injuries.

2. Acceptance, storage and transportation

2.1 Unpacking inspection

When unpacking the product, please check the following contents in time:

(1) Appearance

This instrument has been carefully checked before leaving the factory. If damage is

caused during transportation (please pay special attention to the lining and shell), please
contact our company.

(2) Nameplate

Check whether the product conforms to the ordering requirements according to the

nameplate contents, see the instructions in 4.5.

Fel! Hittar inte referenskälla.

(3) Attachment

Check whether the accessories in the packing box are complete according to the

packing list.

2.2 Storage

If the instrument needs to be stored for a long time after delivery, please pay attention

to the following points:
● the instrument must be stored in the original packaging box.
● the storage place must be dry, vibration free and the ambient temperature suitable.

2.3 Carry

Handle all parts carefully to prevent damage. Please use the original packing box to

transport the instrument to the installation place.

important

● the damaged lining will cause the flow sensor to be scrapped.

●

if the cable is not selected reasonably (see the instructions in 7.1) and the cable sealing

plug or instrument cover is not tightened, the product may be scrapped due to water ingress
or moisture on the instrument shell. 0

«
...
3
4
5
6
7
...
»

Содержание MAG-11 Series



























































Отзывы:

Нет отзывов

Похожие инструкции для MAG-11 Series

Endura AZ20 series

Бренд: ABB Страницы: 8

Бренд: Kane Страницы: 12

Бренд: A&D Страницы: 74

Бренд: La Crosse Technology Страницы: 8

Бренд: Keysight Страницы: 66

Бренд: U.S. Solid Страницы: 30

OMCL-AC240TS-R3

Бренд: Olympus Страницы: 3

K-PATENTS PR-43

Бренд: Vaisala Страницы: 54

Бренд: Omega Страницы: 15

Бренд: TASKING Страницы: 12

Бренд: PCB Piezotronics Страницы: 14

Бренд: Amrutha Technologies Страницы: 22

Бренд: Straightpoint Страницы: 24

Бренд: YOSensi Страницы: 27

Бренд: Scheppach Страницы: 20

Бренд: ICP DAS USA Страницы: 340

ENERGY MAX EM400

Бренд: Molectron Страницы: 40

28APE190008/AI481

Бренд: Apera Instruments Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды