2Flow MAG-11 Series Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 58

background image

1

1. Preface

In order to ensure the normal use of the instrument, please read this manual carefully and
fully understand how to use the instrument before operation.

About this user manual
● The instructions must be provided to the end user.
● Please read this manual carefully before use.
● The contents of this manual can be changed without prior notice.
● All rights reserved. Without the written consent of 2 flow AB, no part of the manual can
be copied in any form.
● 2Flow AB makes no guarantee in any form for this manual, including but not limited to
the sale of this manual and its use for other special purposes.
●  The  company  makes  every  effort  to  ensure  the  correctness  of  the  contents  of  the
instructions. If there are any errors or omissions, please inform 2Flow AB.
●  Besides  the  contents  mentioned  in  the  statement,  2Flow AB  will  not  bear  any  other
responsibilities for this product.
● If the change of product specification, structure or operating parts does not affect the
operation and performance, the user manual will not be revised accordingly.

1.1 Safety tips

●The installation and wiring of flow sensor and temperature sensor must be completed by
professional technicians;
● all wiring terminals and connecting wires of the instrument must be plugged in and out
after power failure;
●  when  measuring  high-temperature  fluid,  the  sensor  housing  will  become  very  hot  to
prevent personnel from scalding.

The provisions of this manual must be observed at all stages of product operation and

maintenance, especially the contents with the following marks.

A warning indicates a danger that may result in injury or death.

Attention indicates that there is a danger, which may cause partial or overall

damage to the instrument.

It is forbidden to indicate that the instrument will not work normally or be damaged.

It is important to draw the attention of operators to avoid instrument damage.

Notes indicate information that must be known about the operation and

characteristics of the instrument.

«
...
2
3
4
5
6
...
»

Содержание MAG-11 Series



























































Отзывы:

Нет отзывов

Похожие инструкции для MAG-11 Series

Бренд: Danfoss Страницы: 8

SMatrix DMX2400

Бренд: dallmeier Страницы: 12

Бренд: Omega Страницы: 74

Бренд: Omega Страницы: 24

Бренд: Parkside Страницы: 114

Бренд: Abus Страницы: 168

Бренд: OHAUS Страницы: 76

Бренд: Keithley Страницы: 343

Бренд: Keithley Страницы: 334

Бренд: La Crosse Technology Страницы: 2

WJ-NU301K Series

Бренд: i-PRO Страницы: 24

WJ-NU101K Series

Бренд: i-PRO Страницы: 18

Бренд: Fender Страницы: 20

Бренд: Topcon Страницы: 62

Бренд: Barksdale Страницы: 2

Бренд: Keysight Страницы: 92

Бренд: ASCEL Electronic Страницы: 64

Бренд: Fly Henry Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды