31
Figure 8
-
21 exit to basic menu
8.4.3 Example of parameter setting with fixed or no decimal point
Take system->signal->low cutoff% as an example, click → in any measurement
interface to enter the menu selection interface, and click ↓ to select the system menu.
Figure 8
-
22 select system menu818
Click → enter the password to enter the system menu, click ↓ and select signal.
Figure 8
-
23 entering the system menu819
Click → to enter the signal submenu, click ↓ to select low cutoff%.
Figure 8
-
24 entering the signal submenu820
Click → to enter the low cutoff% setting interface.
Figure 8
-
25low cutoff% setting interface
The position of the anti black display is the selected number. Click the → key to change
the selected position.
