1RT DTK5400HF, Руководство пользователя

Страница: 26 / 36

TO EXIT THE AUTO REPEAT MODE
Repeat steps [1] to [2], and press the F.FWD/
B
button.
[OFF] will then appear on the menu. Then, press the
RESET/EXIT button to return to TV mode.
Power failure: If there is a power failure for more than
30 seconds, Auto Repeat Playback will go to off.
INDEX SEARCH
This feature provides a method of indexing a recording
starting point so that it can be easily returned to in either
fast forward or rewind mode.
●
The index mark will be made automatically when the
REC button is pressed. It will also be marked at the
starting point of Timer recording and OTR.
●
The index mark will not be recorded if the
PAUSE/STILL button is pressed and released during
recording.
●
The time gap between making the index marks on the
tape should be greater than 1 minute for SP recording
and 3 minutes for SLP recording.
●
In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching
program number 4 and
want to fast forward to
program number 7. You
must skip three programs.
1
Select "INDEX SEARCH" mode
Press the SEARCH MODE button on the remote control
so that the "INDEX SEARCH" appears on the TV
screen.
2
Enter your desired number
Press the PLAY/
▲
or STOP/
▼
button until the number of pro-
grams that you want to skip ap-
pears.
(Example: "03" for 3 programs)
●
The Index Search mode will be cancelled if the pro-
cedures are not activated in 30 seconds.
3
Begin Index Search
Press the REW or F.FWD button. The VCR begins re-
winding or fast forwarding to the beginning of desired
program.
NOTE: Every time an index signal is skipped, the num-
ber in the program indicator decreases by one.
4
After Index Search
When the preset program is reached, the VCR will start
playback automatically.
●
A video cassette must be inserted in the VCR for this
function to work.
●
The number of Index Searches can be set up to 20.
●
This function will not operate in the recording mode.
●
When you want to cancel the Index Search while in
progress, press the STOP button.
TIME SEARCH
The Time Search function makes it possible to quickly ad-
vance the tape to your desired position simply by entering
the exact amount of playback time you want to skip.
Example: To watch a program after 2 hours and 50
minutes from the present position, in either
direction.
1
Select "TIME SEARCH" mode
Press the SEARCH MODE button on the remote control
so that the "TIME SEARCH" appears on the TV screen.
2
Enter your desired time
Press the PLAY/
▲
or STOP/
▼
button until your desired time ap-
pears.
("2:50" stands for 2 hours 50
minutes)
●
The Time Search mode will be cancelled if the pro-
cedures are not activated in 30 seconds.
3
Begin Time Search
By pressing the REW or F.FWD button, the VCR will
rewind or fast forward to the specified point.
The time counts down as the searching progresses.
4
After Time Search
Playback starts automatically when 0:00 is reached.
●
A video cassette must be inserted in the VCR for this
function to work.
●
Time Search can be set up to a maximum of 9 hours
59 minutes (9:59).
●
This function will not operate in the recording mode.
●
When you want to cancel the Time Search while in
progress, press the STOP button.
INDEX SEARCH
03
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
4 3 2 1 1 2 3
End of tape Beginning of tape
CURRENT PLAYBACK PROGRAM
INDEX MARK
TIME SEARCH
2 : 5 0
1B14
H7942
- 26 - EN