ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 376 / 562

Chapter 27 User/Group
ZyWALL 110/310/1100 Series User’s Guide
376
27.3 User Group Summary Screen
User groups consist of access users and other user groups. You cannot put admin users in user
groups. The Group screen provides a summary of all user groups. In addition, this screen allows
you to add, edit, and remove user groups. To access this screen, login to the Web Configurator, and
click Configuration > Object > User/Group > Group.
Figure 244
Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See Section 27.3.1 on page 377 for more
information as well.
Lease Time If you select Use Default Settings in the Authentication Timeout Settings field, the
default lease time is shown.
If you select Use Manual Settings, you need to enter the number of minutes this user
has to renew the current session before the user is logged out. You can specify 1 to
1440 minutes. You can enter 0 to make the number of minutes unlimited. Admin users
renew the session every time the main screen refreshes in the Web Configurator. Access
users can renew the session by clicking the Renew button on their screen. If you allow
access users to renew time automatically (see
Section 27.4 on page 378 ), the users can
select this check box on their screen as well. In this case, the session is automatically
renewed before the lease time expires.
Reauthentication
Time If you select Use Default Settings in the Authentication Timeout Settings field, the
default lease time is shown.
If you select Use Manual Settings, you need to type the number of minutes this user
can be logged into the ZyWALL in one session before the user has to log in again. You
can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes
unlimited. Unlike Lease Time, the user has no opportunity to renew the session
without logging out.
Configuration
Validation Use a user account from the group specified above to test if the configuration is correct.
Enter the account’s user name in the User Name field and click Test.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.
Table 134
Configuration > User/Group > User > Add (continued)
LABEL DESCRIPTION
Table 135
Configuration > Object > User/Group > Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to
remove it before doing so. Removing a group does not remove the user accounts in the
group.