ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 54 / 562

Share

Page: 54 / 562

ZyXEL Communications ZyWALL 110 Series User Manual Download Page 54

Chapter 4 Quick Setup Wizards

ZyWALL 110/310/1100 Series User’s Guide

54

Figure 36

VPN Advanced Wizard: Scenario

Rule Name: Type the name used to identify this VPN connection (and VPN gateway). You may use
1-31 alphanumeric characters, underscores (

_

), or dashes (-), but the first character cannot be a

number. This value is case-sensitive.

Select the scenario that best describes your intended VPN connection. The figure on the left of the
screen changes to match the scenario you select.

• Site-to-site - The remote IPSec device has a static IP address or a domain name. This ZyWALL

can initiate the VPN tunnel.

• Site-to-site with Dynamic Peer - The remote IPSec device has a dynamic IP address. Only the

remote IPSec device can initiate the VPN tunnel.

• Remote Access (Server Role) - Allow incoming connections from IPSec VPN clients. The

clients have dynamic IP addresses and are also known as dial-in users. Only the clients can
initiate the VPN tunnel.

• Remote Access (Client Role) - Connect to an IPSec server. This ZyWALL is the client (dial-in

user) and can initiate the VPN tunnel.

4.3.8 VPN Advanced Wizard - Phase 1 Settings

There are two phases to every IKE (Internet Key Exchange) negotiation – phase 1 (Authentication)
and phase 2 (Key Exchange). A phase 1 exchange establishes an IKE SA (Security Association).

«
...
52
53
54
55
56
...
»

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments