ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 45 / 562

Share

Page: 45 / 562

ZyXEL Communications ZyWALL 110 Series User Manual Download Page 45

Chapter 4 Quick Setup Wizards

ZyWALL 110/310/1100 Series User’s Guide

45

Figure 25

WAN Interface Setup: Step 2

The screens vary depending on what encapsulation type you use. Refer to information provided by
your ISP to know what to enter in each field. Leave a field blank if you don’t have that information.

Note: Enter the Internet access information exactly as your ISP gave it to you.

4.2.3 Configure WAN Settings

Use this screen to select whether the interface should use a fixed or dynamic IP address.

Figure 26

WAN Interface Setup: Step 2

• WAN Interface: This is the interface you are configuring for Internet access.
• Zone: This is the security zone to which this interface and Internet connection belong.
• IP Address Assignment: Select Auto If your ISP did not assign you a fixed IP address.

Select Static if you have a fixed IP address.

4.2.4 WAN and ISP Connection Settings

Use this screen to configure the ISP and WAN interface settings. This screen is read-only if you set
the IP Address Assignment to Static.

Note: Enter the Internet access information exactly as your ISP gave it to you.

«
...
43
44
45
46
47
...
»

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments