ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 132 / 562

Chapter 7 Interfaces
ZyWALL 110/310/1100 Series User’s Guide
132
7.5 Cellular Configuration Screen (3G)
3G (Third Generation) is a digital, packet-switched wireless technology. Bandwidth usage is
optimized as multiple users share the same channel and bandwidth is only allocated to users when
they send data. It allows fast transfer of voice and non-voice data and provides broadband Internet
access to mobile devices.
Note: The actual data rate you obtain varies depending on the 3G device you use, the
signal strength to the service provider’s base station, and so on.
You can configure how the ZyWALL’s 3G device connects to a network (refer to Section 7.5.1 on
page 134 ):
• You can set the 3G device to connect only to the home network, which is the network to which
you are originally subscribed.
• You can set the 3G device to connect to other networks if the signal strength of the home
network is too low or it is unavailable.
Check this
address
Select this to specify a domain name or IP address for the connectivity check. Enter
that domain name or IP address in the field next to it.
Check Port This field only displays when you set the Check Method to tcp. Specify the port
number to use for a TCP connectivity check.
Related Setting
Configure WAN
TRUNK
Click WAN TRUNK to go to a screen where you can configure the interface as part of a
WAN trunk for load balancing.
Policy Route Click Policy Route to go to the screen where you can manually configure a policy
route to associate traffic with this interface.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
Table 46
Configuration > Network > Interface > PPP > Add (continued)
LABEL DESCRIPTION