manualshive.com logo in svg

ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 66 / 562

Share
Download
ZyXEL Communications ZyWALL 110 Series User Manual Download Page 66

Chapter 4 Quick Setup Wizards

ZyWALL 110/310/1100 Series User’s Guide

66

• Remote Policy (IP/Mask):  Any displays in this field because it is not configurable in this 

wizard.

• Nailed-Up: This displays for the site-to-site and remote access client role scenarios. Select this 

to have the ZyWALL automatically renegotiate the IPSec SA when the SA life time expires.

4.4.8  VPN Settings for Configuration Provisioning Advanced Wizard - 
Summary 

This is a read-only summary of the VPN tunnel settings.

Figure 49   

VPN for Configuration Provisioning Advanced Wizard: Summary

• Rule Name: Identifies the VPN connection (and the VPN gateway). 
• Secure Gateway:  Any displays in this field because it is not configurable in this wizard. It 

allows incoming connections from the ZyWALL IPSec VPN Client.

• Pre-Shared Key: VPN tunnel password. 
• Certificate: The certificate the ZyWALL uses to identify itself when setting up the VPN tunnel.
• Local Policy: IP address and subnet mask of the computers on the network behind your ZyWALL 

that can use the tunnel.

• Remote Policy: Any displays in this field because it is not configurable in this wizard.
• The Configuration for Secure Gateway displays the configuration that the ZyWALL IPSec VPN 

Client will get from the ZyWALL.

• Click Save to save the VPN rule. 

4.4.9  VPN Settings for Configuration Provisioning Advanced Wizard- Finish 

Now the rule is configured on the ZyWALL. The Phase 1 rule settings appear in the VPN > IPSec 
VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec VPN > 

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments