ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 504 / 562

Chapter 39 File Manager
ZyWALL 110/310/1100 Series User’s Guide
504
Apply Use this button to have the ZyWALL use a specific configuration file.
Click a configuration file’s row to select it and click Apply to have the ZyWALL use that
configuration file. The ZyWALL does not have to restart in order to use a different
configuration file, although you will need to wait for a few minutes while the system
reconfigures.
The following screen gives you options for what the ZyWALL is to do if it encounters an
error in the configuration file.
Figure 346
Maintenance > File Manager > Configuration File > Apply
Immediately stop applying the configuration file - this is not recommended because
it would leave the rest of the configuration blank. If the interfaces were not configured
before the first error, the console port may be the only way to access the device.
Immediately stop applying the configuration file and roll back to the previous
configuration - this gets the ZyWALL started with a fully valid configuration file as quickly
as possible.
Ignore errors and finish applying the configuration file - this applies the valid parts
of the configuration file and generates error logs for all of the configuration file’s errors.
This lets the ZyWALL apply most of your configuration and you can refer to the logs for
what to fix.
Ignore errors and finish applying the configuration file and then roll back to the
previous configuration - this applies the valid parts of the configuration file, generates
error logs for all of the configuration file’s errors, and starts the ZyWALL with a fully valid
configuration file.
Click OK to have the ZyWALL start applying the configuration file or click Cancel to close
the screen
# This column displays the number for each configuration file entry. This field is a sequential
value, and it is not associated with a specific address. The total number of configuration
files that you can save depends on the sizes of the configuration files and the available
flash storage space.
Table 201
Maintenance > File Manager > Configuration File (continued)
LABEL DESCRIPTION