ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 377 / 562

Chapter 27 User/Group
ZyWALL 110/310/1100 Series User’s Guide
377
27.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To
access this screen, go to the Group screen (see
Section 27.3 on page 376 ), and click either the
Add icon or an Edit icon.
Figure 245
Configuration > User/Group > Group > Add
The following table describes the labels in this screen.
Object
References Select an entry and click Object References to open a screen that shows which settings
use the entry. See
Section 7.3.2 on page 122 for an example.
# This field is a sequential value, and it is not associated with a specific user group.
Group Name This field displays the name of each user group.
Description This field displays the description for each user group.
Member This field lists the members in the user group. Each member is separated by a comma.
Table 135
Configuration > Object > User/Group > Group (continued)
LABEL DESCRIPTION
Table 136
Configuration > User/Group > Group > Add
LABEL DESCRIPTION
Name Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value is
case-sensitive. User group names have to be different than user names.
Description Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
Member List The Member list displays the names of the users and user groups that have been added
to the user group. The order of members is not important. Select users and groups from
the Available list that you want to be members of this group and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.