Chapter 8 Basic Setting
XGS1930 Series User’s Guide
90
Use this screen to set IPv6 interfaces on which you can configure an IPv6 address to access and
manage the Switch. Click
Basic Setting > Interface Setup
in the navigation panel to display the
configuration screen.
Figure 66
Basic Setting > Interface Setup
The following table describes the labels in this screen.
8.10 IPv6
Use this screen to view the IPv6 interface status and configure Switch’s management IPv6 addresses.
Click
Basic Setting
>
IPv6
in the navigation panel to display the IPv6 status screen as shown next.
Table 32 Basic Setting > Interface Setup
LABEL
DESCRIPTION
Interface Type
Select the type of IPv6 interface for which you want to configure. The Switch supports the VLAN
interface type for IPv6 at the time of writing.
Interface ID
Specify a unique identification number (from 1 to 4094) for the interface.
To have IPv6 function properly, you should configure a static VLAN with the same ID number in the
Advanced Application > VLAN
screens.
Add
Click this to create a new entry.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
Save
link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to reset the fields to your previous configuration.
Index
This field displays the index number of an entry.
Interface Type
This field displays the type of interface.
Interface ID
This field displays the identification number of the interface.
Interface
This field displays the interface’s descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel Click
Cancel
to clear the check boxes.
