XGS1930 Series User’s Guide
253
The following table describes the labels in this screen.
Table 126 Advanced Application > LLDP > LLDP-MED Location
LABEL
DESCRIPTION
Port
Enter the port number you want to set up the location within the LLDP-MED network.
Location
Coordinates
The LLDP-MED uses geographical coordinates and Civic Address to set the location
information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City, Street
and other related information.
Latitude
Enter the latitude information. The value should be from 0º to 90º. The negative value
represents the South.
• north
• south
Longitude
Enter the longitude information. The value should be from 0º to 180º. The negative value
represents the West.
• west
• east
Altitude
Enter the altitude information. The value should be from -2097151 to 2097151 in meters or in
floors.
• meters
• floor
Datum
Select the appropriate geodetic datum used by GPS.
• WGS84
• NAD83-NAVD88
• NAD83-MLLW
Civic Address
Enter the Civic Address by providing information such as Country, State, County, City, Street,
Number, ZIP code and other additional information. Enter at least two field in this
configuration including the Country. The valid length of the Country field is 2 characters and
all other fields are up to 32 characters.
• Country
• State
• County
• City
• Division
• Neighbor
• Street
• Leading-Street-Direction
• Street-Suffix
• Trailing-Street-Suffix
• House-Number
• House-Number-Suffix
• Landmark
• Additional-Location
• Name
• Zip-Code
• Building
• Unit
• Floor
• Room-Number
• Place-Type
• Postal-Community-Name
• Post-Office-Box
• Additional-Code
