ZyXEL Communications WAP5705, User Manual

Page: 88 / 156

Chapter 10 LAN
WAP5705 User’s Guide
88
10.3 What You Need To Know
There are two separate IP networks, one inside the LAN network and the other outside the WAN
network as shown next.
Figure 58
LAN and WAN IP Addresses
The LAN parameters of the WAP5705 are preset in the factory with the following values:
• AP mode: IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits)
• Client mode: IP address of 192.168.1.10 with subnet mask of 255.255.255.0 (24 bits)
10.3.1 IP Alias
IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The WAP5705 supports three logical LAN interfaces via its single physical
Ethernet interface with the WAP5705 itself as the gateway for each LAN network.
10.4 LAN IP Screen
Use this screen to change the IP address for your WAP5705. Click Network > LAN > IP .
Figure 59
Network > LAN > IP
WAN
LAN