ZyXEL Communications WAP5705, User Manual

Page: 15 / 156

Chapter 1 Getting to Know Your WAP5705
WAP5705 User’s Guide
15
The following table describes the LEDs and the WPS button.
Table 1
Front Panel LEDs and WPS Button
LED COLOR STATUS DESCRIPTION
Quality Green On AP mode: This LED is always on after the system starts up.
Client mode: The WAP5705 is connecting to an AP and the
transmission rate is 65 Mbps or above.
Amber On Client mode: The WAP5705 is connecting to an AP and the
transmission rate is between 65 Mbps and 19.5 Mbps.
Red On Client mode: The WAP5705 is connecting to an AP and the
transmission rate is below 19.5 Mbps.
Off AP mode: The WAP5705 is not receiving power.
Client mode: The WAP5705 is not receiving power or not
associating with an AP.
Wireless Green On The WAP5705 is ready, but is not sending/receiving data
through the wireless LAN.
Blinking The WAP5705 is sending/receiving data through the wireless
LAN.
Off The wireless LAN is not ready or has failed.
LAN 1-2 Green On The WAP5705 has a successful 10/100/1000 Mbps Ethernet
connection.
Blinking The WAP5705 is sending/receiving data through the LAN.
Off The LAN is not connected.
Power Green On The WAP5705 is receiving power and functioning properly.
Off The WAP5705 is not receiving power.
WPS Blue On WPS is enabled.
Blinking
(slow) The WAP5705 is negotiating a WPS connection with a wireless
device.
Blinking
(fast) The WPS negotiation failed.
Off The wireless LAN is not ready or has failed.