ZyXEL Communications WAH7130, User Manual

Page: 70 / 102

Chapter 10 Maintenance
WAH7130 User’s Guide
74
Figure 41
Maintenance > Backup/Restore
The following table describes the labels in this screen.
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default WAH7130
IP address (192.168.1.1).
10.8 Restart Screen
System restart allows you to reboot the WAH7130 without turning the power off.
Table 35
Maintenance > Backup/Restore
LABEL DESCRIPTION
Backup Click Backup to save the WAH7130’s current configuration to your computer.
File Path Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Note: Do not turn off the WAH7130 while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute
before logging into the WAH7130 again. The WAH7130 automatically restarts in this time
causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Reset Pressing the Reset button in this section clears all user-entered configuration information
and returns the WAH7130 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
WAH7130. Refer to the chapter about introducing the Web Configurator for more
information on the
RESET button.