ZyXEL Communications WAH7130, User Manual

Page: 35 / 102

Chapter 4 WAN
WAH7130 User’s Guide
35
4.4 Broadband Screen
Use this screen to change your WAH7130’s settings for mobile access. Click Network > WAN from
the Configuration menu.
Figure 15
Network > WAN > Broadband
The following table describes the labels in this screen.
A. The International Telecommunication Union (ITU) is an international organization within which governments and the private sector
coordinate global telecom networks and services.
Table 14
Network > WAN > Broadband
LABEL DESCRIPTION
Mobile Access Information
Mode This field is not configurable and shows No SIM card installed. if there is no SIM card
inserted in the WAH7130.
Select the type of the network ( 4G/LTE only , 3G/UMTS only , or 2G/EDGE only ) to
which you want the WAH7130 to connect when there is a SIM card inserted.
Otherwise, select Automatically to have the WAH7130 connect to an available
network using the default settings on the SIM card. If the currently registered mobile
network is not available or the mobile network’s signal strength is too low, the
WAH7130 switches to another available mobile network.
Allow WAN
connectivity when
roaming 3G/4G roaming is to use your mobile device in an area which is not covered by your
service provider.
Select this option to enable roaming to ensure that your WAH7130 is kept connected to
the Internet when you are travelling outside the geographical coverage area of the
network to which you are registered.
ISP Parameters for Mobile Access
Access Point Name
(APN) Enter the Access Point Name (APN) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-
Media Messaging Service)) and charging method.
You can enter up to 31 printable ASCII characters. Spaces are allowed.