ZyXEL Communications VSG-1200 V2 User Manual Download Page 99

Page: 99 / 282

VSG-1200 V2 User’s Guide

Chapter 11 Static Subscriber Accounts

Figure 46

Static Subscriber Account: Backup and Restore: File Download

Save As

window displays. Specify the filename and/or location and click

Save

to save

the backup file.

Figure 47

Static Subscriber Account: Backup and Restore: Save As

You can view the backed up file using any text-editing program.

11.4.2 Restoring a Static Account List

You may restore the static account list if you accidentally reset the VSG back to the factory
defaults and erased the subscriber account information.

Follow the steps below to restore a previously backed up subscriber account list.

In the

Create Static Subscriber Account

screen and scroll down to the

Static Accounts

backup and restore

section.

Summary of Contents for VSG-1200 V2



























































































































































































































































































Search results

Summary of Contents for VSG-1200 V2

Reviews:

Brands by name

Popular brands

ZyXEL Communications VSG-1200 V2, User Manual

Search results

Summary of Contents for VSG-1200 V2

Reviews:

Brands by name

Popular brands